Wood Adhesive - UN1ON Ecco Fix

ECCO FIX is a premium-quality, synthetic resin-based adhesive designed for woodworking applications. It is technically superior in its class, providing excellent bonding strength on plywood and very high water resistance after optimum curing. With its high resin content, ECCO FIX ensures exceptional durability and long-lasting performance, making it ideal for furniture used in high-humidity areas.

Typical Properties:

Fields Of Application:

Bonding laminate, plywood, veneer, particleboard, MDF, block board, hard board to
each other.

Product Advantages:

• Solvent free, Non-hazardous, Non-flammable, No fire hazards.
• Free from offensive smell.
• If required, it can be diluted with clean
  water till applicability is achieved.
• Very quick setting time. Handling
  strength is achieved within 4 – 6 hrs
  of application
• Easy to clean up while wet.
• Excellent film formation.
• Superior flow and spreadability and
  hence it can give higher coverage.
• Excellent bond strength offering better
  moisture resistance.
• Can be applied by brush, roller, spreader
  or any suitable applicator.
• Heat resistance in normal case
• Dries clear

Application Methods:

• Surfaces to be bonded should be free from oil; grease; dust and dirt and should be dry and
  properly leveled.
• For best results, roughen the surfaces to be bonded.
• Stir content of container before use.
• Apply even coats of ECCO FIX first on comparatively non-porous surface, and then on
  porous surface for e.g. apply first on laminate and then on ply wood.
• If possible, application should be such that, it should be lengthwise on one surface and
  breadth-wise on other surface. This will help in proper and uniform spreading of adhesive
  while pressing.
• Before allowing adhesive to dry, and bring both the surfaces in contact together, make
  proper alignment, and start pressing from one side by using wet squeezed cloth to avoid
  bubbles, and ensuring uniform contact.
• Please note that ECCO FIX starts to dry quickly. Position the substrates within 5 – 6
  minutes. Repositioning should be done if required within a minute of joining.
• Pressure can be given by using nails; clamps; weight; masking tape etc.
• Excess adhesive; which oozes out from edges should be wiped off with wet squeezed cloth.
• To get best results, bonded surfaces are to be kept under pressure for 24 hrs.
• If required, pressure can be released after 4-6 hrs and the bonded assembly can be put to
  use.
• In case of highly porous surfaces like particleboard and MDF, it is advised that, a thin coat
  of ECCO FIX is applied by pressure on the surface and allowed to dry. This will fill the pores
  of the surface. After drying, light sanding is to be done for getting smooth leveled surface
  and then this surface is bonded as per the method shown above.

Product Coverage:

• Approx.34 – 38 sq.ft/kg (both side application)

Product Guidelines:

Precaution:

• When not in use, container should be kept closed.
• Skin formation if any, should be removed from the surface before use.

Shelf Life:

• Best to use before 18 months from the date of manufacturing.

Storage:

• Store in cool & dark shaded place; away from the sunlight.