Premium Water Proofing Coating - UN1ON Proof Kadi
Details of Premium Water Proofing Coating - UN1ON Proof
UN1ON PROOF is a fiber reinforced elastomeric liquid applied waterproofing membrane coating that forms a thick, seamless durable film. UN1ON PROOF highly durable waterproofing coating having excellent resistance to UV, Algae, Mildew, Alkaline and efflorescence properties. It is breathable that allows trapped water vapour to escape from the roof.
Areas Of Application:
Can be used for building roofs, terraces, parapet, sunshades and exterior vertical walls. It can also be applied on existing IPS, sound brick-bat coba or cementitious waterproofing.
Features & Benefits:High Strength - Hard wearingUV & IR resistantOutstanding durabilityEasy clean up, non- stainingAlkaline & Efflorescence ResistanceCrack Bridging capability up to 2 mm. widthBreathableSingle pack - easy to usePermanently flexible - will not brittleAlgae & Fungus ResistanceEnvironmentally Safe - non - toxicLong lasting serviceSurface Preparation:PLASTER New masonry surfaces must be allowed to cure completely. It is recommended toallow 28 days as the curing time for new masonry surfaces.CLEANING Surface should be free from any loose paint, dust or grease. Remove all existingbitumen coatings completely. It is recommended to use intense wire brushing or high speedwater jet for thorough cleaning.REPAIRING The substrate must be checked for its soundness using small hammer. Allcracks at corner joints, channels and parapets should be properly treated.FILLING FOR CRACKS For filling cracks up to 3mm use UN1ON Crack Seal. Bigger cracks,damaged portions and hollow areas must be repaired with polymer modified cementmortars.ENSURE that the roof slope of a minimum of 1 in 100, is already provided.Application Description:
| For Horizontal surfaces | For Vertical surfaces |
| Apply a first self-priming coat of UN1ONPROOF, by diluting with 10% of water. | Apply a first self-priming coat of UN1ONPROOF, by diluting with 10% of water. |
| Allow to dry between coat 4-6 hours | Allow to dry between coat 4-6 hours |
| Apply first waterproofing coat without anydilution. Allow to dry 4-6 hours. | Apply first waterproofing coat without anydilution. Allow to dry 4-6 hours. |
| Apply the second waterproofing coatwithout any dilution in a perpendiculardirection to the first. | Apply top coat paint with therecommended system. |
| Form | Ready to use viscous liquid |
| Application temperature | 5ºC to 35ºC |
| Appearance | Viscous Liquid |
| Color | White |
| Specific Gravity | 1.15-1.3 gm/cc |
| Water Resistance | 10 |
| Viscosity | 12000-18000 cps (Brookfield RVF 4/20) |
| Solids by wt.% | 59 to 61 % |
| Hardness | 75 Shore A |
| Tensile strength | 3.0 Mpa |
| Elongation | upto 350% |
Product Guidelines:
Coverage:
Coverage 3-4 m per kg per coat
Shelf Life:
Best to use within 12 months from the date of manufacture.
Storage:
Store in a cool and dry place for better shelf life.Packing:5kg & 20 KgPrecautions:Do not apply during rains or extreme temperatures.Avoid abuses which may lead to puncturing of membrane.Ensure that the product is applied at least 6 inches inside the drain pipe.For best results, apply parapet to parapet to envelope the entire building.
Offered Product
