Premium Water Proofing Coating - UN1ON Proof
Premium Water Proofing Coating - UN1ON Proof Details
UN1ON PROOF is a fiber reinforced elastomeric liquid applied waterproofing membrane coating that forms a thick, seamless durable film. UN1ON PROOF highly durable waterproofing coating having excellent resistance to UV, Algae, Mildew, Alkaline and efflorescence properties. It is breathable that allows trapped water vapour to escape from the roof.
Areas Of Application:
Can be used for building roofs, terraces, parapet, sunshades and exterior vertical walls. It can also be applied on existing IPS, sound brick-bat coba or cementitious waterproofing.
Features & Benefits:
- High Strength - Hard wearing
- UV & IR resistant
- Outstanding durability
- Easy clean up, non- staining
- Alkaline & Efflorescence Resistance
- Crack Bridging capability up to 2 mm. width
- Breathable
- Single pack - easy to use
- Permanently flexible - will not brittle
- Algae & Fungus Resistance
- Environmentally Safe - non - toxic
- Long lasting service
Surface Preparation:
- PLASTER New masonry surfaces must be allowed to cure completely. It is recommended to
allow 28 days as the curing time for new masonry surfaces. - CLEANING Surface should be free from any loose paint, dust or grease. Remove all existing
bitumen coatings completely. It is recommended to use intense wire brushing or high speed
water jet for thorough cleaning. - REPAIRING The substrate must be checked for its soundness using small hammer. All
cracks at corner joints, channels and parapets should be properly treated. - FILLING FOR CRACKS For filling cracks up to 3mm use UN1ON Crack Seal. Bigger cracks,
damaged portions and hollow areas must be repaired with polymer modified cement
mortars. - ENSURE that the roof slope of a minimum of 1 in 100, is already provided.
Application Description:
| For Horizontal surfaces | For Vertical surfaces |
| Apply a first self-priming coat of UN1ON PROOF, by diluting with 10% of water. | Apply a first self-priming coat of UN1ON PROOF, by diluting with 10% of water. |
| Allow to dry between coat 4-6 hours | Allow to dry between coat 4-6 hours |
| Apply first waterproofing coat without any dilution. Allow to dry 4-6 hours. | Apply first waterproofing coat without any dilution. Allow to dry 4-6 hours. |
| Apply the second waterproofing coat without any dilution in a perpendicular direction to the first. | Apply top coat paint with the recommended system. |
| Form | Ready to use viscous liquid |
| Application temperature | 5ºC to 35ºC |
| Appearance | Viscous Liquid |
| Color | White |
| Specific Gravity | 1.15-1.3 gm/cc |
| Water Resistance | 10 |
| Viscosity | 12000-18000 cps (Brookfield RVF 4/20) |
| Solids by wt.% | 59 to 61 % |
| Hardness | 75 Shore A |
| Tensile strength | 3.0 Mpa |
| Elongation | upto 350% |
Product Guidelines:
Coverage:
- Coverage 3-4 m per kg per coat
Shelf Life:
- Best to use within 12 months from the date of manufacture.
Storage:
- Store in a cool and dry place for better shelf life.
Packing:
- 5kg & 20 Kg
Precautions:
- Do not apply during rains or extreme temperatures.
- Avoid abuses which may lead to puncturing of membrane.
- Ensure that the product is applied at least 6 inches inside the drain pipe.
- For best results, apply parapet to parapet to envelope the entire building.
Related Products
Premium Wall Sealing Coating - UN1ON Prime
Areas Of Application:Masonry, brick, plastering substrate and fibre boardFeatures & Benefits:Excellent water... Continue
Advance Water Proofing Coating - UN1ON WP-60
UN1ON WP-60 is a multifunctional polymer emulsion for enhancing the properties of cement slurry or mortar. It provides a... Continue
Premium Crack Filling - UN1ON KRACK SEAL
UN1ON KRACK SEAL Paste is a single-pack, acrylic-based, ready-to-use putty designed for filling and sealing cracks on bo... Continue
Advance Screed / Plaster - UN1ON SCREED PL
Cement based water resistant polymer modified curing free ready mix plasterAreas Of Application:RED BRICKSCONCRE... Continue